Cascade Jets

Posted by On December 11, 2014 0 Comment

Cascade Jets must be installed on a determinate height due to its water level dependency. A geyser-like eruption of foamy white water the Cascade jets bursts from the surface & then falls heavily in a conical pattern. It will increase stream height if water level fall & will decrease stream height when water level rise. Overflow drain, water level sensor & surge reduction system should be installed to achieve best performances.
The white water of the Cascade jet makes an aesthetic statement in both a daytime operation or at night when lit with under water light.
1-1-2


JK-550 Series Cascade Jets ( water Level Dependent )
Reference JK- 551 JK- 552 JK- 553 JK- 554 JK- 555 JK- 556
Connection ½ ” Dia.BSP 1 ” Dia. BSP 1½ “Dia.BSP 2 “Dia.BSP 2 ½”dia BSP 3 “Dia.BSP
Outlets Dia. 35 mm 50 mm 82 mm 96 mm 120 mm 160 mm
Material of Construction Cast Bronze/ Brass Cast Bronze/ Brass Cast Bronze/ Brass Cast Bronze/ Brass Cast Bronze/ Brass Cast Bronze/ Brass
Appro. Weight, Kg. – – – – – –

JK-550 Series Performance of jets
Jets Height In Mts. Q Lits./Min Q Lits./Min Q Lits./Min Q Lits./Min Q Lits./Min Q Lits./Min
0.50 15.00 32.00 52.00 109.00 175.00 295.00
0.75 17.80 40.00 70.00 137.00 210.00 370.00
1.00 21.00 45.00 82.00 163.00 235.00 405.00
1.50 27.00 55.00 104.00 198.00 285.00 495.00
2.00 31.00 63.00 120.00 235.00 335.00 570.00
2.50 – 72.00 135.00 256.00 388.00 645.00
3.00 – 80.00 145.00 286.00 430.00 700.00
4.00 – 91.00 164.00 329.00 500.00 770.00
5.00 – – 177.00 365.00 560.00 860.00
6.00 – – 185.00 395.00 620.00 930.00
7.00 – – 190.00 425.00 670.00 1010.00
8.00 – – – 450.00 720.00 1075.00
9.00 – – – 472.00 760.00 1130.00
10.00 – – – 495.00 810.00 1195.00
11.00 – – – 510.00 845.00 1242.00
12.00 – – – 520.00 880.00 1300.00
13.00 – – – – 920.00 1340.00
14.00 – – – – 950.00 1385.00
15.00 – – – – 980.00 1420.00
16.00 – – – – 1010.00 1460.00
17.00 – – – – – 1500.00
18.00 – – – – – 1525.00

INFORMATION AT GLANCE

JK-550 Series Cascade Jets ( water Level Dependent )
  • Massive Frothy water effect.
  • Elegant look.
  • Highly visible and wind resistant.
  • Water supply to the jet must be linear, non-turbulent.
  • Cascade jets require a constant water level.
  • All models are available swivel Joint as optional.
  • Proper suction strainer must use at pump.
  • 100 % filter water is recommended where feasible.
  • Easy to clean.

IMPORTANT NOTE:

  • Dimensions & Material of Construction Subject to change without Notice.
  • Stated flows and head pressure requirement for any listed spray height are required at the nozzle. Designer & engineer shall be responsible for the accuracy of system flow rates & system head loss requirement.