Multi Pod Diameter

Posted by On December 11, 2014 0 Comment

Adjustable Multi Pod Jets Create a three Tiered to allow changing of spray pattern angles and much higher spray heights. Which allow for adaptability to site requirements. The intermediate and outer rings of jets are independently height adjustable with controls valves.1-1-2


JK-400 Series- Multi Pod Diameter & Height Adjustable Three Tier Jets
Reference JK-401 JK-402 JK-403 JK-404 JK-405 JK-406
Connection 1 “ 1 “ 1 ½ “ 1 ½ “ 2 “ 2 “
Nos.of Jets & Orifice 15 @ 2.50 19 @ 3.00 25 @ 6.00 37 @ 4.00 36 @ 6.00
1 @ 8.00 		70 @4.00
1 @ 8.00
Material of Construction Cast Bronze/ Brass Cast Bronze/ Brass Cast Bronze/ Brass Cast Bronze/ Brass Cast Bronze/ Brass Cast Bronze/ Brass
Appro. Weight, Kg. – – – – – –

JK-400 Series Performance of jets
Jets Height In Mts. Q L/Min Q L/Min Q L/Min Q L/Min Q L/Min Q L/Min
1.00 12.00 20.00 – – – –
1.50 20.00 44.00 185.00 120.00 254.00 245.00
2.00 25.00 53.00 225.00 150.00 310.00 305.00
2.50 – 60.00 251.00 170.00 345.00 345.00
3.00 – 67.00 282.00 190.00 390.00 380.00
2.50 – 60.00 251.00 170.00 345.00 345.00
3.00 – 67.00 282.00 190.00 390.00 380.00
3.50 – 72.00 302.00 205.00 415.00 410.00
4.00 – 75.00 320.00 215.00 435.00 435.00
5.00 – – 353.00 237.00 485.00 480.00
6.00 – – 393.00 265.00 540.00 530.00

INFORMATION AT GLANCE

JK-400 Series- Multi Pod Diameter & Height Adjustable Three Tier Jets( water Level Independent)
  • Attractive Multi stage water pattern
  • Precise fall jets that are stable in wind.
  • Fountain height is continually adjustable.
  • Water Level In dependent.
  • Proper suction strainer must use at pump.
  • 100 % filter water is recommended where feasible.
  • Easy to clean.

IMPORTANT NOTE:

  • Dimensions & Material of Construction Subject to change without Notice.
  • Stated flows and head pressure requirement for any listed spray height are required at the nozzle. Designer & engineer shall be responsible for the accuracy of system flow rates & system head loss requirement.