Laminar Flow Jets

Posted by On December 11, 2014 0 Comment

Laminar Jets Create a Crystal glass –like water rod, when it illuminate with 9W RGB LED Light for Rainbow colour combination water stream which transmits light throughout ita whole range, lighting the surface against which crash to. The laminar water jet designed to have minimum installation and infrastructure requirements.. Produces a stunning visual effect on the viewer and is widely used in both architectural fountains and water shows.
It is essentially a water rod, so steady that resembles to glass and yet so lively. This glass-like stream always follows its arc-shaped, parabolic trajectory without falling under it. Seeing this special water effect closely is an astonishing experience both day and night with its lit with RGB LED color light.
These Laminar jets provide an unprecedented attraction for people of all age.
The space that may be considered for these effects should be expected to be wet at all operating times. These jets will get all surfaces in its trajectory path wet at least once at start-up.

1-1-2

JK- 1150 Series – Laminar Flow Jets
Reference JK- 1151/ 1152 /1153
Connection 1 ” BSP 1 ” BSP 1 ” BSP
Material of Construction Stainless Steel Stainless Steel Stainless Steel
Orifice (mm) 12 mm 12 mm 12 mm
Weight/Kg – – –
Jet Angle 45* 60* 75*

JK-1150 Series Performance of jets
Horizontal Length L ( M ) L/Min
 m.c.a. Height
( M )
 L/Min m.c.a. Height
( M )		 L/Min m.c.a. Height
( M )
1.00 11 0.40 0.12 12 0.50 0.32 22 1.20 0.90
2.00 20 0.70 0.32 25 1.00 0.75 41 2.50 1.90
3.00 31 1.20 0.62 35 1.50 1.12 63 4.50 4.00
4.00 40 1.60 0.91 43 2.00 1.60 – – –
5.00 42 2.20 1.16 56 2.70 2.10 – – –
6.00 45 2.80 1.41 – – – – – –

INFORMATION AT GLANCE

JK- 1150 Series – Laminar Flow Jets
  • Mind blowing water effect
  • Crystal Glass like water stream
  • Quick & Easy Installation
  • Delicate sound
  • Best For Swimming Pool , small & medium water pool.
  • Highly visible when lit at night.
  • Water supply to the Spout must be linear, non-turbulent.
  • Non-Submersible.
  • Can be used indoors and outdoors with dry installation technology
  • Integrated illumination effects with strong RGB-LED light
  • Extremely stable – with or without floor anchoring
  • 100 % filter water is required.
  • Stainless steel Mounting Stand.

IMPORTANT NOTE:

  • Dimensions & Material of Construction Subject to change without Notice.
  • Stated flows and head pressure requirement for any listed spray height are required at the nozzle. Designer & engineer shall be responsible for the accuracy of system flow rates & system head loss requirement.
  • Water appearance : excellent
  • Wind resistance : poor
  • Splash : Moderate
  • Sound level : Moderate
  • Visibility : Good