Ground Jets / Floor Flush Jets / Deck Jets

Posted by On December 11, 2014 0 Comment

The Multi- purpose Ground Jets is designed to be cast into concrete flush with surface installation in unsupervised public playgrounds. The spray head is vandal resistant. This jet can also be used in small and medium sized deck, Swimming pool deck fountains. It requires a special wrench to remove the nozzle plate from the body.
1-1-2

JK-950 Series – Ground Jets / Floor Flush Jets / Deck Jets
Reference JK-GF- 951 JK-GF- 952 JK-GF- 953 JK-GF- 954
Connection 1 ” BSP Ring Cluster Spray Head 1 ” BSP Angular Fan spray Head 1″ BSP
Crown Jets 		2″ BSP
Fyrefly Jets
Material of Construction Cast Bronze/ Brass Cast Bronze/ Brass Cast Bronze/ Brass Cast Bronze/ Brass
Orifice 12 x @ 5 mm 2 x 7 x @ 4 mm 2 x 12 x @ 3 mm 8 x @ 6mm
Weight/Kg – – – –

JK-950 Series Performance of jets
Display Height in Mts. Q
LPM
 Head
In mts
 Q
LPM
 Head
In mts
 Q
LPM
 Head
In mts
 Q
LPM
 Head
In mts
1.00 80 1.00 30 1.00 90 1.00 15 1.00
1.50 100 1.40 45 1.40 120 1.40 25 1.40
2.00 125 1.75 60 1.75 150 1.75 35 1.75
2.50 150 2.00 78 2.00 180 2.00 – –
3.00 180 2.50 90 2.50 210 2.50 – –

INFORMATION AT GLANCE

JK-950 Series – Ground Jets / Floor Flush Jets / Deck Jets
  • Solid clear Water stream.
  • This Jets can be you in Interactive water feature
  • Heavy duty machined construction
  • Highly visible and wind resistant
  • Not water level dependent
  • Water supply to the jet must be linear, non-turbulent.

IMPORTANT NOTE:

  • Dimensions & Material of Construction Subject to change without Notice.
  • Stated flows and head pressure requirement for any listed spray height are required at the nozzle. Designer & engineer shall be responsible for the accuracy of system flow rates & system head loss requirement.
  • Water appearance: excellent
  • Wind resistance : Good
  • Splash : Poor
  • Sound level : Moderate
  • Visibility : Good