Aeration/ Foam effect Jets
Aeration/ Foam Jets produce a solid, foamy water column with minimum flow requirement and without the need of linear water supply. These jets have become extremely popular being the most versatile & cost effective solution for a multitude applications. The highly aerated water figure created by Aeration / Foam jets is not water level dependent and thus supringly steady and lively, in addition these nozzles behave amazing well to sequencing effects, deploying their full foam effect in a fraction of second.
The White water of the Aeration jet makes an aesthetic statement in both a daytime operation and at night when lit with LED Light.
JK-850 Series –Aeration/ Foam effect Jets |
|||||||||||||
Reference | JK-851 | JK-852 | JK-853 | ||||||||||
Connection | 1 “BSP | 1 ½ “BSP | 2 “BSP | ||||||||||
Material of Construction | Cast Bronze/ Brass | Cast Bronze/ Brass | Cast Bronze/ Brass | ||||||||||
Orifice | 25mm | 40mm | 50mm | ||||||||||
Weight/Kg | – | – | – | ||||||||||
JK-850 Series Performance of jets |
|||||||||||||
Display Height in Mts. | Q LPM |
Head In mts |
Q LPM |
Head In mts |
Q LPM |
Head In mts |
|||||||
0.50 | 28 | 1.00 | – | – | – | – | |||||||
1 | 36 | 1.50 | 70 | 2.50 | – | – | |||||||
1.50 | 44 | 2.50 | 85 | 3.75 | 115 | 3.50 | |||||||
2.00 | 50 | 3.20 | 100 | 5.00 | 130 | 5.00 | |||||||
2.50 | 56 | 4.10 | 112 | 6.00 | 150 | 6.50 | |||||||
3.00 | 62 | 5.00 | 120 | 7.00 | 162 | 7.50 | |||||||
3.50 | 67 | 6.50 | 131 | 8.20 | 175 | 8.60 | |||||||
4.00 | – | – | 140 | 9.25 | 185 | 10.00 | |||||||
5.00 | – | – | 150 | 10.5 | 200 | 11.00 | |||||||
6.00 | – | – | 160 | 12.00 | 220 | 12.50 | |||||||
8.00 | – | – | – | – | 250 | 15.00 | |||||||
10.00 | – | – | – | – | 310 | 19.00 |
INFORMATION AT GLANCE
JK-850 Series –Aeration/ Foam effect Jets
- Solid, Foamy Water.
- Highly aerated.
- Amazing choreography behavior.
- Heavy duty machined construction.
- Highly visible and wind resistant.
- Not water level dependent.
- Water supply to the jet must be linear, non-turbulent
IMPORTANT NOTE:
- Dimensions & Material of Construction Subject to change without Notice.
- Stated flows and head pressure requirement for any listed spray height are required at the nozzle. Designer & engineer shall be responsible for the accuracy of system flow rates & system head loss requirement.
- Water appearance: excellent
- Wind resistance : Poor
- Splash : Moderate
- Sound level : Moderate
- Visibility : Good