Volcano Nozzle
This kind of Jets creates Parabolic water jets effect at different heights achieving a very attractive different tiered clear water streams. A sparking and unique two to four tired effect of clear streams. Whether small spray fountain or large water features Valcano nozzles generate a Bundle of jets from 1.0 to 15.00 metres in height that fall in multiple stages in this configuration the individual jets remain clear and relatively stable in wind. Ideal for small & medium water pools.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
JK- 350 Series – Volcano Nozzle ( water Level Independent ) |
|||||||||||||
| Reference | JK-351 | JK- 352 | JK- 353 | JK-354 | JK-355 | JK-356 | JK-357 | ||||||
| Connection | ½ “ | ½ “ | ¾ “ | 1″ | 1″ | 1″ | 1″ | ||||||
| Nos. of Jets & Orifice | 6 @ 2.50 mm 1 @3.00mm |
31 @ 2.00mm | 20/10/1 @ 2.5 |
24/12/1 @ 3.00 |
24/12/6/1 @ 3.00 |
– | – | ||||||
| Material of Construction | Cast Bronze/ Brass | Cast Bronze/ Brass | Cast Bronze/ Brass | Cast Bronze/ Brass | Cast Bronze/ Brass | Cast Bronze/ Brass | Cast Bronze/ Brass | ||||||
| Appro. Weight, Kg. | – | – | – | – | – | – | – | ||||||
JK-350 Series Performance of jets |
|||||||||||||
| Jets Height In Mts. | Q L/Min | Q L/Min | Q L/Min | Q L/Min | Q L/Min | Q L/Min | Q L/Min | ||||||
| 0.50 | 10.00 | 27.00 | 33.00 | 33.00 | 39.00 | – | – | ||||||
| 1.00 | 13.50 | 42.00 | 52.00 | 47.00 | 55.00 | – | – | ||||||
| 1.50 | 16.00 | 50.00 | 63.00 | 60.00 | 70.00 | – | – | ||||||
| 2.00 | – | – | 75.00 | 69.00 | 81.00 | – | – | ||||||
| 2.50 | – | – | – | 78.00 | 90.00 | – | – | ||||||
| 3.00 | – | – | – | 86.00 | 101.00 | – | – | ||||||
| 4.00 | – | – | – | 100.00 | 117.00 | – | – | ||||||
INFORMATION AT GLANCE
JK-350 Series– Volcano Nozzle ( water Level Independent)
- Attractive Multi stage water pattern
- Precise fall jets that are stable in wind.
- Fountain height is continually adjustable.
- Water Level In dependent.
- Easy to clean.
IMPORTANT NOTE:
- Dimensions & Material of Construction Subject to change without Notice.
- Stated flows and head pressure requirement for any listed spray height are required at the nozzle. Designer & engineer shall be responsible for the accuracy of system flow rates & system head loss requirement.
