Directional Adjustable ball & Socket Jets / Clear Stream jets

The Direction Adjustable Ball & Socket Jets Produce a Single Stream of clear water varying in diameter. The selection is based on not only appearances but also on performance. The pipe size connection is based on Orifice size of jets. The Direction Adjustable Ball & Socket Jets are small And medium size nozzles capable to achieve a maximum height of 10 meters. Integral ball joint allows to gets parabolic or vertical jets, offering wide range of water displays.1-1-2

n1     1-1-2  1-2  1-2-1

n1 1-1-2 1-2 1-2-1

n1 1-1-2 1-2 1-2-1

n1 1-1-2 1-2 1-2-1

n1 1-1-2

JK- 100 Series Directional Adjustable ball & Socket Jets / Clear Stream jets

Reference JK-101 JK-102 JK-102A JK-103 JK-103A JK-104 JK-104A JK-106 JK-107
Connection 1/8” 1/4” 1/4” 3/8” 3/8” 1/2” 1/2” 3/4” 1”
Orifice 2.5mm 3mm 4mm 5mm 6mm 8mm 10mm 12mm 14mm
Material of Construction Cast Bronze/ Brass Cast Bronze/ Brass Cast Bronze/ Brass Cast Bronze/ Brass Cast Bronze/ Brass Cast Bronze/ Brass Cast Bronze/ Brass Cast Bronze/ Brass Cast Bronze/ Brass
Appro, weight(Kg)

JK- 100 Series Performance of Jets

Jets Height in Mts Q L/Min Q L/Min Q
L/Min
Q L/Min Q
L/Min
Q L/Min Q
L/Min
Q L/Min Q L/Min
0.75 1.00 1.20 3.00 5.00 5.60 12.00 20.00 33.80 40.00
1.00 1.20 1.60 3.30 5.60 7.00 14.00 23.00 37.00 46.00
1.25 1.50 2.00 3.90 7.20 8.20 16.50 24.50 41.00 52.00
1.50 1.90 2.40 4.30 8.40 9.50 18.00 28.00 44.00 58.00
1.75 2.30 2.80 4.90 9.10 10.8 19.60 32.50 47.50 62.00
2.00 2.70 3.20 5.50 10.00 11.70 21.50 33.00 50.00 70.00
2.50 3.50 6.10 11.10 13.50 24.50 38.00 56.00 74.00
3.00 6.80 12.00 15.00 27.50 42.00 62.00 86.00
3.50 13.50 16.00 30.00 46.50 67.00 94.00
4.00 16.80 32.50 50.00 72.00 102.00
5.00 37.00 58.00 82.00 116.00

JK- 100 Series Directional Adjustable ball & Socket Jets / Clear Stream jets

Reference JK-107-A JK-108 JK-109
Connection 1” 1 ½” 1”dia. X 12”
Orifice 16 mm 19 mm 12 mm
Material of Construction Cast Bronze/ Brass Cast Bronze/ Brass Cast Bronze/ Brass
Appro, weight(Kg)

JK- 100 Series Performance of Jets

Jets Height in Mts Q L/Min Q L/Min Q
L/Min
1.50 50.00 85.00 44.00
2.00 75.00 95.00 47.50
2.50 85.00 105.00 50.00
3.00 95.00 115.00 56.00
4.00 115.00 140.00 62.00
5.00 170.00 67.00
6.00 200.00 72.00
7.00 230.00 82.00
8.00 260.00
9.00
10.00
11.00
12.00

INFORMATION:

  • Pump Suction Strainer required to be -50% smaller than the Jets Orifice size.
  • Water loss is about 25%.
  • In calculation of total GPM add 10% as reserve.
  • For better performance stream jets shall be supplies with linear non- turbulent water into the jets.
  • Valves, elbows and reducers etc.. can be used but only 10 times the pipe diameter distant from jets.

IMPORTANT NOTE:

  • Dimensions & Material of Construction Subject to change without Notice.
  • Stated flows and head pressure requirement for any listed spray height are required at the nozzle. Designer & engineer shall be responsible for the accuracy of system flow rates & system head loss requirement.